09III/09IV (093/094) Nuclear Submarine Thread

Blitzo

Lieutenant General
Staff member
Super Moderator
Registered Member
Different people obviously have different standards for evidence, but I'll just state that for my standard of evidence, at this stage I would assume that Type 09IIIB would feature PMM (hence either hybrid propulsion or IEPS) until I receive new information to the contrary.

That is fine, you are entitled to your perception of what a satisfactory standard of evidence is.
However, as a normal posting member of the forum I will continue to contest the idea that we can speak of 09IIIB as if it has a PMM (either hybrid nuclear propulsion or IEPS).


To be clear -- I am very open to the idea that 09V will feature IEPS, and everything you've described arguably fulfills 09V's likely emergence timetable much more than 09IIIB.

09IIIB has not been spoken of as anything of that sort, and given the newly launched submarine earlier this year is thought to be 09IIIB, I simply in good conscience cannot entertain the idea that at such a late stage of its development/production that we can infer it to have a relatively new and unconventional propulsion arrangement in absence of credible indicators from the usual suspects.
 

OppositeDay

Senior Member
Registered Member
tThat is fine, you are entitled to your perception of what a satisfactory standard of evidence is.
However, as a normal posting member of the forum I will continue to contest the idea that we can speak of 09IIIB as if it has a PMM (either hybrid nuclear propulsion or IEPS).


To be clear -- I am very open to the idea that 09V will feature IEPS, and everything you've described arguably fulfills 09V's likely emergence timetable much more than 09IIIB.

09IIIB has not been spoken of as anything of that sort, and given the newly launched submarine earlier this year is thought to be 09IIIB, I simply in good conscience cannot entertain the idea that at such a late stage of its development/production that we can infer it to have a relatively new and unconventional propulsion arrangement in absence of credible indicators from the usual suspects.

That's good and I'm having a second thought on hybrid propulsion myself. But here are somethings to consider regarding development timeline, for anyone who's still reading my long posts.

According to the ST Daily the motor's development was completed by 2015 (the end of the 12th five year plan). Engineers of the 712th Institute went to Sanya in late 2017 to configurate and test the motor. The actual installation work was already done when they arrived.

Timeline of the PMM's development
????-2011 Research & early development
2011-2015 Engineering development and long-term reliability trials, safety trials for combat scenarios
201(?)-2017 Installation on a (most likely nuclear) PLAN submarine at Sanya submarine base (likely @ the underground dry dock there)
2017- Trials onboard the modified/upgraded PLAN submarine

Note that the 2017 trial was described as the first "live" ("live" as in "live fire") submarine trial (首台实艇安装...试验). The deliberate choice of the qualified phrase "实艇" instead of just “艇上" indicates that it had been previously tested on a submarine testing platform, just not "实艇". Logically this should be the case as you don't do the first onboard trial of a new propulsion system on an active duty (and likely nuclear) submarine when you have dedicated testing platforms. The trial in 2017 was analogous to the first trial of WS-20 on a Y-20A frame (in 2021), not to the first trial of WS-20 on the IL-76 testing platform (in 2014). The first satellite image of Type 09IIIB construction at Huludao came in late 2020. The propulsion system probably wasn't installed until 2021. I'd say the development timeline of the PMM fits well with that of Type 09IIIB.

The first Siemens Permasyn PMM was delivered for installation in 2001, and the first Type 212A was launched in 2002. The first CSSC PMM was already installed on a PLAN submarine by 2017, and the first Type 09IIIB was launched in 2022. If the new propulsion system was tested on a Type 09III/A in 2017, Type 09IIIB could very well use the same design. A 5+ year gap between the first subsystem delivery to the end user (PLAN) and the launch of the first brand new vessel is cautious enough. For China, PMM is not turbofan. Permanent magnet electric machine is one of China's industrial strength. Dongfang Electric launched its 10MW direct drive PMSG for wind turbines in the same year (2019) as Siemens.

Also the head of 712th Institute's claimed in 2017 that the new propulsion system (engineered for and tested on submarines) was going to see applications in the next few years and realize a leapfrogging/generation-skipping advance of Chinese naval propulsion. "未来几年永磁电机推进系统将得到推广应用,实现我国舰船推进技术的跨越式发展". Type 09V's timeline wouldn't match the "the next few years" of 2017 claim.

As for the overall propulsion system, I've come to regard hybrid as not a very good idea. Still too much gears making noises and maintaining both the mechanical and electric transmission is likely a nightmare. Probably hard to operate too. It's go IEPS or go home. I just saw that photo of the Ohio-class's reduction gearbox. Those things are surely big. Getting rid of the reduction gearbox alone can probably save enough space for a PMM ring. IEPS is the way forward.

A further question is whether the 5MW PMM listed on 712th's website is for a nuclear submarine. Here's a 2.85MW Siemens Permasyn PMM being installed to a Type 214, leaving just enough space for maintenance access. That's what you want on a submarine to save space.

1662739292419.png
Assuming 712th's PMM is as power/torque dense as Siemens Permasyn, you would expect the 5MW PMM to be about 20% larger in diameter. This fits Type 039's dimensions, not 09III's. I guess on a 09III it can be installed further back toward the tail of the hull. But mechanical system for the rudders need space too, so you can't push it back too much. You can always use space for additional noise control or for power system, I guess? So potentially the motor can work for both Type 039 and Type 09III/09IV sized hulls.

I did a check, the first Chinese 5MW class direct drive PMSG for offshore wind turbine was launched in 2010.
Please, Log in or Register to view URLs content!


Direct drive wind turbine PMSGs operate at a significantly lower rpm than PMM for marine propulsion, so they're not the same thing (different numbers of poles), but it should indicate the industrial and technology base China had at that time. So 5MW is a realistic power rating for a Chinese marine propulsion PMM developed during 2011-2015. We shouldn't expect something like a 10MW motor in that timeframe.

The first Chinese 10MW class direct drive wind turbine PMSG was launched in 2019. So a Chinese 10MW per ring marine propulsion PMM could be ready for delivery by 2025 if the development timeline is similar to that of the 5MW model, probably faster. Again they're not the same thing, but depend on the same technological and industrial base. Type 09V might be in time for 10MW per ring, I think. This also shows how ahead of time USN's original plan for Zumwalt to equip 36MW (2 rings 18MW each) PMM was. GE only launched its 6MW class direct drive wind turbine PMSG in 2016, and it was designed by their French subsidiary (formerly Alstom)!
 
Last edited:

externallisting

New Member
Registered Member
That's good and I'm having a second thought on hybrid propulsion myself. But here are somethings to consider regarding development timeline, for anyone who's still reading my long posts.
I hope I'm incorrect but are you conflating/confusing the differences between wind turbines and nuclear submarines? Lol, lmao even.
I just saw that photo of the Ohio-class's reduction gearbox
This is the end result of "OSINT" watchers..
 

OppositeDay

Senior Member
Registered Member
I hope I'm incorrect but are you conflating/confusing the differences between wind turbines and nuclear submarines? Lol, lmao even.

Obviously they're not the same, as I said many times in my previous posts. Wind turbine direct drive PMSGs operate at extremely low rpm. Propulsion PMMs don't. They operate in different environments. 712th Institute did live explosion reliability tests for its naval propulsion PMM. Doubt any wind turbine generator needs that. However, they operate by the same principles and are built with a common set of technologies, materials and manufacturing techniques. The same also applies to electrical systems needed for PM generators/motors to work. VFDs for PM motors and converters for PM generators are not the same thing, but they take the same set of power semiconductor components to make and similar electrical engineering expertise to design.

BTW, I hope you know that the GE subsidiary that's responsible for engineering their wind turbine generators is GE Power Conversion, not GE Renewable Energy. GE Power Conversion also produces electric propulsion motors for QE-class aircraft carriers and Zumwalt-class destroyers. Perhaps you should enlighten the GE board on the lack of commonalities between wind turbine generators and naval propulsion, and suggest them to integrate their wind turbine generator engineering team into their renewable energy division instead for improved synergy.
 

SEAD

Junior Member
Registered Member
That's good and I'm having a second thought on hybrid propulsion myself. But here are somethings to consider regarding development timeline, for anyone who's still reading my long posts.

According to the ST Daily the motor's development was completed by 2015 (the end of the 12th five year plan). Engineers of the 712th Institute went to Sanya in late 2017 to configurate and test the motor. The actual installation work was already done when they arrived.

Timeline of the PMM's development
????-2011 Research & early development
2011-2015 Engineering development and long-term reliability trials, safety trials for combat scenarios
201(?)-2017 Installation on a (most likely nuclear) PLAN submarine at Sanya submarine base (likely @ the underground dry dock there)
2017- Trials onboard the modified/upgraded PLAN submarine

Note that the 2017 trial was described as the first "live" ("live" as in "live fire") submarine trial (首台实艇安装...试验). The deliberate choice of the qualified phrase "实艇" instead of just “艇上" indicates that it had been previously tested on a submarine testing platform, just not "实艇". Logically this should be the case as you don't do the first onboard trial of a new propulsion system on an active duty (and likely nuclear) submarine when you have dedicated testing platforms. The trial in 2017 was analogous to the first trial of WS-20 on a Y-20A frame (in 2021), not to the first trial of WS-20 on the IL-76 testing platform (in 2014). The first satellite image of Type 09IIIB construction at Huludao came in late 2020. The propulsion system probably wasn't installed until 2021. I'd say the development timeline of the PMM fits well with that of Type 09IIIB.

The first Siemens Permasyn PMM was delivered for installation in 2001, and the first Type 212A was launched in 2002. The first CSSC PMM was already installed on a PLAN submarine by 2017, and the first Type 09IIIB was launched in 2022. If the new propulsion system was tested on a Type 09III/A in 2017, Type 09IIIB could very well use the same design. A 5+ year gap between the first subsystem delivery to the end user (PLAN) and the launch of the first brand new vessel is cautious enough. For China, PMM is not turbofan. Permanent magnet electric machine is one of China's industrial strength. Dongfang Electric launched its 10MW direct drive PMSG for wind turbines in the same year (2019) as Siemens.

Also the head of 712th Institute's claimed in 2017 that the new propulsion system (engineered for and tested on submarines) was going to see applications in the next few years and realize a leapfrogging/generation-skipping advance of Chinese naval propulsion. "未来几年永磁电机推进系统将得到推广应用,实现我国舰船推进技术的跨越式发展". Type 09V's timeline wouldn't match the "the next few years" of 2017 claim.

As for the overall propulsion system, I've come to regard hybrid as not a very good idea. Still too much gears making noises and maintaining both the mechanical and electric transmission is likely a nightmare. Probably hard to operate too. It's go IEPS or go home. I just saw that photo of the Ohio-class's reduction gearbox. Those things are surely big. Getting rid of the reduction gearbox alone can probably save enough space for a PMM ring. IEPS is the way forward.

A further question is whether the 5MW PMM listed on 712th's website is for a nuclear submarine. Here's a 2.85MW Siemens Permasyn PMM being installed to a Type 214, leaving just enough space for maintenance access. That's what you want on a submarine to save space.

View attachment 97257
Assuming 712th's PMM is as power/torque dense as Siemens Permasyn, you would expect the 5MW PMM to be about 20% larger in diameter. This fits Type 039's dimensions, not 09III's. I guess on a 09III it can be installed further back toward the tail of the hull. But mechanical system for the rudders need space too, so you can't push it back too much. You can always use space for additional noise control or for power system, I guess? So potentially the motor can work for both Type 039 and Type 09III/09IV sized hulls.

I did a check, the first Chinese 5MW class direct drive PMSG for offshore wind turbine was launched in 2010.
Please, Log in or Register to view URLs content!


Direct drive wind turbine PMSGs operate at a significantly lower rpm than PMM for marine propulsion, so they're not the same thing (different numbers of poles), but it should indicate the industrial and technology base China had at that time. So 5MW is a realistic power rating for a Chinese marine propulsion PMM developed during 2011-2015. We shouldn't expect something like a 10MW motor in that timeframe.

The first Chinese 10MW class direct drive wind turbine PMSG was launched in 2019. So a Chinese 10MW per ring marine propulsion PMM could be ready for delivery by 2025 if the development timeline is similar to that of the 5MW model, probably faster. Again they're not the same thing, but depend on the same technological and industrial base. Type 09V might be in time for 10MW per ring, I think. This also shows how ahead of time USN's original plan for Zumwalt to equip 36MW (2 rings 18MW each) PMM was. GE only launched its 6MW class direct drive wind turbine PMSG in 2016, and it was designed by their French subsidiary (formerly Alstom)!
5MW seems decent for SSK, but too low for SSNs
 

by78

General
Long March Boat No. 18 (长征18号艇)

52451452190_ae534ecad7_k.jpg
52450483337_6e07ee008c_k.jpg
 

Atomicfrog

Major
Registered Member
Looking at this list:

Please, Log in or Register to view URLs content!

What are/happened to LM15-17?

I am guessing LM1 & 2 were early experimental boats not brought into service.
LM1 is a Type 091 submarine Han class turned museum LM2 is a decommissionned Han class. Maybe LM15-17 were assigned but never been finished, I think two more type 94 are in construction ?
 
Last edited:
Top