Canadian Military News, Reports, Data, etc.

Scratch

Captain
News bit about canadian servicemen engaged in a brief firefight with IS fighters. They're doing their advising to the Peshmerga forces close to the front and then take an actual look to confirm what they're doing. Seems like a prudent approach. They're also reported as directing airstrikes against IS targets.

Please, Log in or Register to view URLs content!


Please, Log in or Register to view URLs content!
Please, Log in or Register to view URLs content!
 

Jeff Head

General
Registered Member
Please, Log in or Register to view URLs content!


Candada-purchases.jpg
Naval Today said:
The Canadian Government awarded a contract for the construction of six Arctic Offshore Patrol Ships (AOPS) to Irving Shipbuilding Inc as part of the National Shipbuilding Procurement Strategy (NSPS).

This contract, valued at $2.3 billion, marks the start of the construction phase under the NSPS.

The AOPS build contract will sustain approximately 1,000 jobs at Irving Shipbuilding as well as many jobs at suppliers across Canada.

Construction of an initial block for the first AOPS is scheduled for the summer, while full production will commence in September 2015.

Delivery of the first HMCS Harry DeWolf class ship is expected in 2018.

It was also confirmed that Irving Shipbuilding will be the Prime Contractor for the Canadian Surface Combatant project. As outlined in the NSPS RFP and the resulting umbrella agreement with the selected shipyards, Canada retains the right to determine if the shipyard will be designated as the Prime Contractor. After discussions with industry and review by an independent third party, it was determined that Irving is best positioned to manage the contracts associated with the three decades of work to design and build these ships.
 
Last edited:

TerraN_EmpirE

Tyrant King
I am not so impressive with this gun but what catches my eyes are the labels "NOT MAN FIREABLE". So what is it for?

mCQ9wPy.jpg

It's a early working prototype and as such all the bugs have yet to be worked out including the possibility of a catastrophic failure I.E. KABOOM!!
This unit will be bench tested fired by remote control using a simple trigger pulling mechanism until the engineers have achieved a set number of bench shots and proven that it will not explode then they will move on and trial building units for manned firing.

This gun or concept of it has a history of total failure aka known as other prototype OICW, not worth at all, overcomplex, overengineered and costs more than soldier earns in a year.

not Quite the OICW was canned I will grant you, but it was not as huge a blunder as you would like to make it.
It aimed to create a semiautomatic over barrel grenade launcher mated to a selective fire carbine with a advanced computer. The Issue that killed it was not if it could be built, It was infact practical to construct and function. The issue was weight. it came in at just under 19 pounds the objective was 14 pounds. additionally in testing the 20mm rounds offered less bang for the Bucks So the Requirements changed to a 25mm and the weight of the Grenade launcher was going to jump up.
The Carbine was as light as possible though and Even if they had moved to a PDW like the MP7A1 as a base it would still have tipped the scales at almost 17 pounds.
so the US broke the program up and the M25 CDTE developed from the grenade launcher actually has been fielded.
Farther more The South Korean K11 based on a similar concept but with a bolt action grenade launcher has some 4,000 units in service with South Korea. The Streight pull bolt action being light enough that it is just over 13 pounds, And the PLA is testing the same concept in there ZH-05

The Canadian system however is not based on the OICW.
It's actually a 5.56mm Cased Telescoped Bullpup mated to a over barrel module that could be a 3 shot 40mm Grenade launcher ( in this case ) or a 12 gauge semi automatic shotgun. The optic is also a simple Elcan C79A2 3.4x28mm magnified optic the standard issue for all Canadian military long arms.
Quoting here as the Program in question is Canadian
 

ahho

Junior Member
sipes-related-1.jpg

sipes-related-2.jpg

These are the additional picture that I got from the Canadian Government website.
Please, Log in or Register to view URLs content!


From what I read, they are trying to minimize the weight of the weapon. Here is a quote from the article
"When optimized, the integrated weapon prototype could weigh less than a C7 equipped with a M203 grenade launcher"

Currently, it does look crude, but if you take a look at my first pic (the one without the grenade launcher) it looks like a simple bullpup that can easily be mass produced. (though this is not its final design)
 

TerraN_EmpirE

Tyrant King
for those not in the know on this the C7 is a M16 clone in standard issue to Canadian military service.

one of the changes the Canadian design is making is shifting from conventional ammo to cased telescoped ammo. Traditionally used in high powered weapons like tank guns, the US has been working on it for small arms as part of the LSAT program. It offers a 40% weight reduction compared to conventional ammo and is already at technology readiness level 7 after 25,000 rounds were fired in trials in 2011 of the US Lightweight Small Arms Technology LMG of course that's assuming the Canadians are using the exact same rounds.
Remember The US and Canada have a defence relationship that borders on Incest, and by Treaty have to have a high level of commonality of systems.
An additional note of Reality following Art.
note the size of the magazines seen on these, It looks alot bigger then a 30 rounder. makes me wonder if the Canadians are going to make a mock up from the US Army's Objective force Warrior program in particular the Crye Precision MR-C reality?MR-C_GL.jpg
Although the launcher is below not above the MR-C concept included a 45 or 50 round capacity bullpup in either 5.56mm or 6.8mm. It was never really intended to be more of a stand in for XM8 then the Individual carbine, It did however make a claim to fame in a number of video games and inspired the guns from HALO
 
Last edited:

FORBIN

Lieutenant General
Registered Member
3 on 4 SSK Victoria operationnal, 3 based to Halifax, Atlantic coast and one based to Esquimalt, Pacific coast.

Aut translation
The fleet of submarines Victoria Class is now operational, and three of four submarines available for operations, said the latest state of the fleet of the Royal Canadian Navy in February 19.HMCS Windsor, Victoria and Chicoutimi were all at sea in December 2014 and spent a cumulative total of about 260 days at sea in 2014.HMCS Corner Brook is currently docked at Victoria Shipyards site to submit to his extended period in dry dock in the support contract service of the Victoria-class concluded with Babcock Canada Inc. He is expected to remain there until 2017 .Canadian submarines generally working in an operational cycle in which each building is available from the fleet for six years, the so-called "operational period", followed by two years of major maintenance work during a period prolonged dry dock, says the Royal Canadian Navy in its state of the fleet.Because of their small size and their electric propulsion system extremely quiet, conventional diesel-electric submarines like the Victoria Class are equipped with stealth capabilities and increased maneuverability as we have seen with the sub -marin Victoria during RIMPAC 2012.They have advantages in certain conditions with respect to nuclear submarines, especially on the coasts and in strategic choke points, which makes them a valuable asset for Canada and our international partners in the coming years.
Please, Log in or Register to view URLs content!


Please, Log in or Register to view URLs content!


 
Top