US Navy DDG 1000 Zumwalt Class

Jeff Head

General
Registered Member
found this graphics (very recent, obviously, and officially-looking):
23430521.jpg

so I wonder what does the sentence "DDG 1000 will triple the naval surface fires coverage as well as tripling the capability against anti-ship cruise missiles." represent?
As she sits now, with the AGS and ESSMs, I believe she easily fulfills those two statements when compared to other vessels and their typical armament and loadout that would be deployed in the surface fire role..

With a rail gun in the future, I believe the statement will still stand.
 

Jeff Head

General
Registered Member
GREAT video of the medevac of the ailing fisherman off of the deck of the USS Zumwalt during her initial builder's sea trials.

Those trials turned into a life or death drama for a fisherman who had a heart condition and the Coast Guard was called to get him. Given the sea state and the conditions, they preferred lifting him off of the deck of the Zumwalt that happened to be in the area at the time.

A small boat was launched from the Zumwalt with Navy personnel to transfer the fisherman to the Zumwalt, and then the Coast Guard helicopter medevac'd him form there.

Great stuff. Kudos to the US Navy and US Coast Guard.


See:

Please, Log in or Register to view URLs content!
 
WHAT did I say, huh?

That's what I am talking about.

now according to NavyTimes
Navy's Rail Gun Still Headed to Sea, but on Which Ship?
One of the prime attributes of the DDG 1000 Zumwalt-class destroyers is the design’s 78-megawatt integrated power system, able to switch electrical power between propulsion, sensor and weapon systems. It’s long been touted as the best platform to field new energy-gobbling weapons like rail guns and lasers.

A year ago, however, it appeared the first ship that might carry a rail gun to sea might be a joint high speed vessel (JHSV) fitted with a temporary installation. Briefers at naval exhibitions spoke publicly of the plans, and at least one model of the proposed demonstration was on display.

Plans for the at-sea demonstration remain in place, officials said, but it’s looking more likely that a test using an expeditionary fast transport (EPF) — the new designation for JHSVs — won’t take place at least until 2017, if at all.

“What I’m finding is if I go ahead with the demo it will slow my development,” Rear Adm. Pete Fanta, director of surface warfare, said during a Dec. 30 interview at the Pentagon. “I would rather get an operational unit out there faster than do a demonstration that just does a demonstration.

“It’s not definitely off but it’s not definitely going ahead,” Fanta said, “primarily because it will slow the engineering work that I have to do to get that power transference that I need to get multiple repeatable shots that I can now install in a ship. And I would frankly rather have an operational unit faster than have to take the nine months to a year it will take to set up the demo and install the systems, take the one operational [rail gun] unit I have, put it on a ship, take it to sea, do a dozen shots, turn around, take it off, reinstall it into a test bed.”

Officially, the JHSV/EPF demonstration is still on the books.

“The plan to perform the at-sea demo in 2016 is still on,” said Matt Leonard, a spokesman at the Naval Sea Systems Command (NAVSEA). “Basically there’s been no change to the plan, but discussions are ongoing.”

NAVSEA is acting as the system engineering lead for the JHSV/EPF demo, coordinating with the Office of Naval Research and the Military Sealift Command.

Other sources said they were unaware of much planning about the demo. “It’s not been a topic of discussion,” one source said, “but I’ve not heard anything to say the testing on an EPF is not going ahead.” Even if it were to proceed, another source added, “at this point we think the most likely time will be in mid-2017.”

But Fanta is focused not on the demonstration, but on driving to an operational system.

“There are two technologies coming out of the rail gun program that both show very high promise,” he said. “One is the rail gun itself, and two is the projectile we need to shoot out of that rail gun, a hypervelocity projectile. Something that goes at high speeds that comes out of that barrel and is able to hit a spot multiple dozens of miles away.”

The goal, he said, is to make the projectile “usable for more than just rail gun. Can I take my powder guns and use that same sort of projectile?” The technology in the projectile, he added, “actually is what enables it to fly that distance with that accuracy.”

Both the rail gun and laser weapons have moved from theoretical concepts and are approaching the developmental stage.

“It’s engineering at this point, it’s no longer science,” Fanta said. “It’s no longer the deep dark secrets of what can I do with this sort of energy. It’s engineering and how much power density can I get, how much beam quality can I get, what sort of metallurgy do I need to sustain multiple shots over multiple periods of time. The rail gun as well as the laser.”

His office is also rethinking the way the gun system is conceived.

“My old gun barrels used to last me a few thousand rounds. Is that still the way we want to go? Other countries are solving it the other way. Maybe if I carry four barrels and have them easily swapped out with a bunch of bosun’s mates on the foc’sle and stick ‘em in and a half-turn and you go. It’s kind of the way we do it when we overheat machine guns. The new machine guns, you got the old barrel, you stick in a new one and you keep shooting. Maybe that’s the way to go if we can’t solve the metallurgy issues that allow me to do 1,000 rounds out of a barrel.”

Fanta is eying the number two main battery position on the destroyer Lyndon B. Johnson (DDG 1002), third and last of the Zumwalt class, as a prime candidate to take the first at-sea rail gun. The ship, under construction at Bath Iron Works, carries two 155mm Advanced Gun Systems (AGS) in those positions.

“Would I like it on DDG 1002? Yes. That would be my goal,” Fanta said, noting he has looked at installing an operational rail gun just before the ship “gets ready to go to its first deployment. I need to be able to have a power generation, a power transference and the barrel round integration to work for that level of integration to get out there.”

But, he cautioned, “I don’t know if I can get there from the engineering status yet. But that’s what we continue to look at.”

Fanta was adamant that an operational rail gun is fast approaching. When asked if he could field an operational unit in five years, he was adamant.

“Yes,” he said, then repeated it.

There has been no decision to switch out the AGS, he said, and both guns and their large automated magazines are still scheduled to be installed on the ship at Bath.

And while NAVSEA is working on how a rail gun system would be installed on the Johnson, Fanta is also looking for a bigger test range to shoot the rail gun, now at the Naval Surface Warfare Center in Dahlgren, Virginia. One possibility, he acknowledged is the huge White Sands Missile Range in New Mexico.

“I need to be able to see how this thing — for both the projectile and the gun — how it shoots at full range, which means I need both elevation and altitude and long range where I can go blow the top off a mountain someplace and not worry about someone fishing around somewhere.

“The discussion now,” he added, is whether to “move it to a better site that allows me to do full range testing, or do I go do the demo? Because it’s an either/or, it’s not both at this point.”
source:
Please, Log in or Register to view URLs content!
 

Jeff Head

General
Registered Member
now according to NavyTimes
Navy's Rail Gun Still Headed to Sea, but on Which Ship?

source:
Please, Log in or Register to view URLs content!
As for the Zumwalt, I would agree with Brumby that it is most likely on the LBJ, the 3rd.

But I also know that Atomic wants to field one on the Burke class...and that is very interesting. One for the Buke is likely not to be a 155mm weapon, more likely a 127mm weapon.

I am interested in seeing exactly which size they place on the JHSV this year for testing at sea because that will tell us which class vessel will get the first one IMHO.

155mm means Zumwalt (which IMHO is most likely)
127mm means Burke
 
As for the Zumwalt, I would agree with Brumby that it is most likely on the LBJ, the 3rd.

...
this is probably related (despite the text doesn't say "railgun"):
Raytheon secures $255m contract extension for US Navy’s third Zumwalt-class destroyer
Raytheon has secured a contract extension of $255m to engineer the mission system equipment for the US Navy's third Zumwalt-class (DDG 1000) guided-missile destroyer, the USS Lyndon B Johnson (DDG-1002).

The latest contract comes with options, which if exercised can increase the value of the contract to a sum of $349m.

Work under the contract will be carried out by the company across its facilities in the US and Canada.

Around 40% of the work is to be done in Portsmouth, Rhode Island; 25% in Andover, Massachusetts; 18% in Marlboro, Massachusetts; 5% in Charlottesville, Virginia, another 5% in McKinney, Texas; 5% in Moorestown, New Jersey and last 2% to be done in Ontario, Canada.

The contract is expected to be completed by October 2019.

The third and the last Zumwalt destroyer will be incorporated with Raytheon engineered technologies, such as the total ship computing environment, electronic modular enclosure, integrated undersea warfare system, and the MK57 vertical launching system.

Additionally, the destroyer will feature an advanced gun system and an integrated power system.

Raytheon was previously contracted to deliver engineering services for Zumalt-class destroyers.

The company will serve as the prime mission systems equipment integrator for all electronic and combat systems for the programme.

The Naval Sea Systems Command, Washington, District of Columbia will serve as the contracting activity.

In December, the US Navy's first Zumwalt-class (DDG 1000) destroyer sailed out to sea from shipbuilder General Dynamics Bath Iron Works for the first time to begin its maiden sea trials.
source:
Please, Log in or Register to view URLs content!
 

Jeff Head

General
Registered Member
$255 million and an advanced gun system is likely a rail gun.
To be fair...the actual name of the existing new 155mm gun system on the Zumwalt's is the AGS, which stands for Advanced Gun System.

LBJ will certainly have that (there are two guns for each vessel), but that does not preclude also having a Rail Gin in the second position.
 

FORBIN

Lieutenant General
Registered Member
USN presses on with Zumwalt-class destroyers

After completing its first at-sea underway period, the lead ship of the US Navy's (USN's) Zumwalt-class (DDG 1000) destroyer is preparing for builder's trials in February.

Assuming the second set of sea trials go well, Zumwalt (DDG 1000), which completed alpha sea trials in early December 2015, will proceed to acceptance trials in the March timeframe with a planned delivery in April, DDG 1000 programme manager Rear Admiral (select) James Downey said at the Surface Navy Association's annual symposium on 14 January.

During its seven-day alpha trials, Zumwalt performed well and demonstrated better than expected stability, officials said. The 186 m (610 ft) ship ran up to full power (up to 33 kt) and was able to stop completely in 90 seconds. As part of the trials, it also accomplished full rudder swings, demonstrating less than 8 degrees of list.

"The faster it goes, the faster it responds," Rear Adm Downey said, adding that the propulsion plant was exercised in more than a dozen configurations and exceeded requirements. Zumwalt encountered 8 to 10 ft seas in the Gulf of Maine, but otherwise did not see significant bad weather. Its razor-sharp bow was able to pierce though the water, officials noted. The team also gathered good data on the hull's radar cross-section, which is performing well.

Second-in-class Michael Monsoor (DDG 1001) is 84% complete at General Dynamics Bath Iron Works in Bath, Maine, and is expected to be ready for launch by the end of June. Meanwhile, the third and final Zumwalt destroyer Lyndon B Johnson (DDG 1002) is 43% complete, with 90 of 97 of its units under construction. Production of its deckhouse - which reverted back to an all-steel design from the original composite

Please, Log in or Register to view URLs content!
 
Top