Chinese Aviation Industry

taxiya

Brigadier
Registered Member
are you talking specifically about the Chinese variant? If so, it has not flied yet, the first flying object is still being assembled as of November 2015.

Also the intended engine WZ16/Ardiden3C just passed "stationary test run" in France in November 2015. So if Z15 need to wait for it to make its maiden flight, I guess it will be at least some time in late 2016. As the airbus variant H175 is only different from Z15 by the engine (P&W), I am not sure a Chinese fully owned Z15 with a temperary P&W engine should be counted as Z15 or H175 as H175 is already in service.
correction WZ16/Ardiden3C was ground tested in November 2013 according to Trubomeca.
Therefor, I guess the maiden flight of Z15 should be some time 2016, possibly first half.
 

by78

General
AG600's landing gear assembly...

(1536 x 865)
24217765344_642c2a6e2e_o.jpg
 

ahojunk

Senior Member
Please, Log in or Register to view URLs content!

By Yuan Can (
Please, Log in or Register to view URLs content!
) 16:29, February 26, 2016

FOREIGN201602261629000138600032986.jpg
File photo.​

China's own domestically built aircraft, Y-12F, has received certification of airworthiness from the Federal Aviation Administration (FAA), according to a report by Xinhua News Agency.

The Y-12F, a new turboprop-powered utility regional aircraft, is the third type of aircraft manufactured by the Aviation Industry Corporation of China (AVIC) to obtain FAA certification, following the Y-12IV and Y-12E. The aircraft is the only one among 23 eight-ton aircraft in the commuter category that has earned the certification and will be put into the market.

An aviation insider said this achievement proves that this type of aircraft has met the latest airworthiness standards, and that it is a breakthrough for the domestic civilian aircraft manufacturing industry. This accomplishment will also help to enhance the international influence and competitiveness of domestically built civilian aircraft.

According to a staff member of AVIC, the Y-12, a high-wing twin-engine turboprop utility aircraft built by Harbin Aircraft Industry Group, is China's first domestically produced civilian aircraft that has obtained airworthiness certification from developed countries like the U.S., the U.K. and Russia.

Y-12F, the latest version of the Y-12, is a turboprop-powered utility regional aircraft that makes full use of mature aviation technology and is manufactured in accordance with CCAR 23-R 3 airworthiness standards by China Civil Aviation and Federal Aviation Regulations Part 23 by the FAA.

Y-12F aircraft can be used in various industries including passenger and cargo transportation, maritime monitoring, aerial delivery, aerial shooting, geological exploration, medical rescue and artificial precipitation.

The maximum take-off weight of this aircraft is 8.4 tons, and its largest payload is three tons. It has an economic cruising speed of 400 kilometers per hour, a longest cruising range of 2,255 kilometers, and a maximum ceiling of 7,000 meters. It can carry 19 passengers and three standard LD3 containers.

The aircraft is superior to other similar types of aircraft for its larger cabin volume, heavier payload capability, higher speed, longer cruising range and plateau capability.

Over 200 units of Y-12 aircraft have been delivered to and operated in nearly 30 countries and regions worldwide. It is expected that domestic and overseas demand for Y-12F aircraft will exceed 100 units.
 

delft

Brigadier
Please, Log in or Register to view URLs content!

By Yuan Can (
Please, Log in or Register to view URLs content!
) 16:29, February 26, 2016

View attachment 25466
File photo.​

China's own domestically built aircraft, Y-12F, has received certification of airworthiness from the Federal Aviation Administration (FAA), according to a report by Xinhua News Agency.

The Y-12F, a new turboprop-powered utility regional aircraft, is the third type of aircraft manufactured by the Aviation Industry Corporation of China (AVIC) to obtain FAA certification, following the Y-12IV and Y-12E. The aircraft is the only one among 23 eight-ton aircraft in the commuter category that has earned the certification and will be put into the market.

An aviation insider said this achievement proves that this type of aircraft has met the latest airworthiness standards, and that it is a breakthrough for the domestic civilian aircraft manufacturing industry. This accomplishment will also help to enhance the international influence and competitiveness of domestically built civilian aircraft.

According to a staff member of AVIC, the Y-12, a high-wing twin-engine turboprop utility aircraft built by Harbin Aircraft Industry Group, is China's first domestically produced civilian aircraft that has obtained airworthiness certification from developed countries like the U.S., the U.K. and Russia.

Y-12F, the latest version of the Y-12, is a turboprop-powered utility regional aircraft that makes full use of mature aviation technology and is manufactured in accordance with CCAR 23-R 3 airworthiness standards by China Civil Aviation and Federal Aviation Regulations Part 23 by the FAA.

Y-12F aircraft can be used in various industries including passenger and cargo transportation, maritime monitoring, aerial delivery, aerial shooting, geological exploration, medical rescue and artificial precipitation.

The maximum take-off weight of this aircraft is 8.4 tons, and its largest payload is three tons. It has an economic cruising speed of 400 kilometers per hour, a longest cruising range of 2,255 kilometers, and a maximum ceiling of 7,000 meters. It can carry 19 passengers and three standard LD3 containers.

The aircraft is superior to other similar types of aircraft for its larger cabin volume, heavier payload capability, higher speed, longer cruising range and plateau capability.

Over 200 units of Y-12 aircraft have been delivered to and operated in nearly 30 countries and regions worldwide. It is expected that domestic and overseas demand for Y-12F aircraft will exceed 100 units.
"aerial shooting" is a mistranslation for aerial photogrametry?
 

schenkus

Junior Member
Registered Member
AG600's landing gear assembly...

(1536 x 865)
24217765344_642c2a6e2e_o.jpg

Does anyone know how many of these flying boats China wants to build and what they will be used for ?

I guess they will find use in the Coast Guard in a combination MPA / SAR role and a firefighter version might even find some exports.

I'm just curious if there really is a big enough market for this kind of aircraft.
 

AF-1

Junior Member
Registered Member
Still no news about C919 for a long time, what is happening with that project, any updates about tests, taxi tests...?
 

Deino

Lieutenant General
Staff member
Super Moderator
Registered Member
Seems as if there are some severe delays with the C919 program ... :(:confused:

Taking an increasingly cautious approach to its C919 narrowbody airliner program, Comac has extended its planned duration of flight testing beyond two years, pushing an unannounced target for first delivery into 2019. The schedule could easily slip a little further, since the Chinese state manufacturer is struggling to achieve its stated aim of flying the first C919 in 2016, industry sources say. Two years ago, first delivery was targeted at 2018, but Comac has announced no update since ...

Please, Log in or Register to view URLs content!


Deino
 
Top